Manual

MAN70628 REV A
July 2017 | uniz3d.com
31
7. The surface of the screen has
liquid or solid resin residue
At the beginning of the
printing, there is solid resin
residue on the build platform
surface that causes damage to
the resin tank film
Replace a new resin tank and clean the residual
resin on the screen
8. The resin leaks on the right
side of the printer
Used resin bottle with old seal
solution
Clean up the residual resin follow the guidance,
and replace a new resin bottle with new seal
solution
The air-bleed hole has not been
pierced on the top of the resin
bottle
To pierce any of the holes on the top of the
resin bottle by the provided cone
9. There is excess printed part
molding, It appears light leakage
outside the screen display area
when you remove the resin tank
and click on show logo
Shading tape is damaged and
leads to light leakage
Buy a shading tape, cut the tape and then cover
it