Manual

July 2017 | uniz3d.com
30
3. Abnormal LCD panel, It does
not display or flash the logo,
display differently on the left and
right side of the panel under the
show logo function
The LCD cable is not inserted
properly
Follow the guidance to re-insert the LCD cable
The screen is damaged
Follow the guidance to replace the LCD panel
4. Printed model has the problem
of bad strip modeling
A row of lights is damaged on
the LED light board
Return to the factory to repair
5. Printed model has thin strip or
a defect that is granular and
unformed
Black spot or black bar appears
on the screen
Follow the guidance to replace the LCD panel
The tension of the resin tank
film is not strong
Replace a new resin tank
6. There are wavy lines on the XY
plane
Resin tank film has rippled
effect
Replace a new resin tank，and increase the
cooling time properly for next printing