Manual

July 2017 | uniz3d.com
28
3. Additional Tools
New Scene The current scene will be discarded, and a new scene will be
created.
Save Scene Save the current scene in UNIZ file format which include 3D
model data, support structures, operation history (translation, orientation,
scaling), and slice profile. You can load any saved scene and resume editing
at a later time.
Save Scene as Save current scene to another .UNIZ file.
Undo Operation Repeal one previous operation.
Redo Operation Remake one previous operation repealed by “Undo”.
Advanced Setting
Exposure Time of First Layers sets exposure time of first 3 layers, which is
usually longer than other layers to ensure good adhesion between the
platform and the first few layers, 15 seconds is suggested.
LED Power sets the power of the LEDS and will affect curing time of each
layer. This may be adjusted according to the current print A value between
150 to 250 is suggested. A light meter and the Show Logo function may be
used together to calibrate the light intensity. Typical light output intensity
on the screen is 5000 to 6000 lux on ‘white’ area.
Wall thickness of Hollowing sets the shell thickness of parts being
hollowed.