Manual

MAN70628 REV A
July 2017 | uniz3d.com
27
b. Print Process
Send Data to Printer: Click Start Button to send current slice to this
printer.
Complete File Transfer: Once you click Start, Uniz Desktop’s progress bar
and the printer's front LED circle button will indicate the file transfer
progress.
Confirm Print Job: Make sure that your printer is ready to print and then
touch the printer's front LED circle button to confirm print job.
WARNING Before final confirmation, please make sure the build platform, resin tank, and
resin bottle are installed. Make sure the build platform and resin tank are clear of
debris. Make sure the resin level sensor is properly installed.
After confirmation, you may disconnect your computer from the printer.
3.0 Upload Slice (Optional)
If you want to share your print in Uniz Cloud, press the Upload Button on
the main tools to open following sub menu.