Manual
MAN70628 REV A
July 2017 | uniz3d.com
21
Lift, lifts the activated object form the build platform up 5mm.
Down, pushes the activated object down to the build platform.
Generate, generates the support structure using the current settings
for all selected models.
Edit, allow manually add, modify, or delete support structures.
Entry/Exit Manual Edit
Press the Edit button, the system entry manual edit support mode.
Whether the model is selected or not, you can edit supports manually.
Click the Edit button again, the system will return to automatic
support mode.
Add Support
Trace mouse cursor over the model, when your cursor appears as a
green line, clicking on the surface of the model to add a support. If
the cursor appears as a red line, it means there is no need to add a
support.
Modify Support
Click on the surface of the support, it will be highlighted to indicate
that it is being selected.
Once selected, you can drag and drop it to target location. If the
support turn red while moving, the current location is not
recommended.