Manual

MAN70628 REV A
July 2017 | uniz3d.com
17
2.4 Change Position
Pressing the Move Button will open following sub menu
 Once the Position tab is open, hold the left mouse button on the object
and move the mouse to move the object freely in the X-Y plane. If the
Shift key is held down, the object will be moved up and down along the
Z-axis instead.
 The activated object can also be moved by inputting X/Y/Z values in
the field, press Enter to apply changes.
 Bring active part in contact with platform.
 Center active part on platform.
 Duplicate active part.
Tips: Make sure the models are distributed evenly on build platform.
Un-balanced forces on the build platform may result in inferior
precision or cracking.
Once supports are attached to a model, its Z-position cannot be
modified anymore.