Manual

MAN70628 REV A

July 2017 | uniz3d.com

4. Insert Build Platform

1) Keep the metal surface of build platform downward, make sure the

locking arm is opened, put the build platform on the arm.

2) Turn the locking arm clockwise to lock the build platform.

5. Insert Resin Cartridge

1) Remove the cleaning bottle

2) Remove rigid cap of resin bottle

3) Inert the resin bottle into the opening, and make sure the needle

punctures the rubber cap for appropriate pumping

4) Pick open one of the vent holes with the provided pricker

5) Put rigid cap on the opposite side of bottle