User Guide

Chapter 5 Troubleshooting Guidelines
340S8 Rev : A Page
51
1. Remove the four rubber stopper on the front display cover and unfasten four (4) screws
underneath.
Grasp and remove the display front cover.
2. Unfasten two (2) screws on the D-A inverter card and disconnect the cables on both sides.
3. Unfasten four (4) screws on the LCD display and unfasten four (4) screws on both side of
the hinges.
Remove the LCD from the display cover.
Make sure to remember the LCD cable arrangement to avoid problem when assembling
the LCD display.