User's Manual

The cord set must have minimum rated current capacity of 7 A.
 The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard
C8303 (15 A, 125 VAC) configuration.
OTHER COUNTRIES
 The cord set fittings must bear the certification mark of the agency responsible for
evaluation in a specific country. Acceptable agencies are:
 BSI (UK)
 OVE (Australia)
 CEBEC (Belgium)
 SEMKO (Sweden)
 FIMKO (Finland)
 DEMKO (Denmark)
 NEMKO (Norway)
 SETI (Finland)
 EANSW (Australia)
 SEV (Switzerland)
 IMQ (Italy)
 UTE (France)
 CCC (China)
 PSB (Singapore)
 PSE (Japan)
 BSMI (Taiwan)
 B (Polish)
 VDE (Germany)
 SASO (Saudi Arabia)
 The flexible cord must be of a HAR (harmonized) type HO5VV-F 3-conductor cord with a
minimum conductor size of 0.03 square inches.
 The minimum specification for the flexible cord for Class II product are: (1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
 The cord set must have a current capacity of at least 10 A and a nominal voltage rating of 125 / 250
VAC.
CAUTION: MODEL X51IAx IS DESIGNED TO USE WITH THE FLLOWING AC ADAPTER
MODEL ONLY
Manufacture: LITE-ON ELECTRONICS, INC.; LI SHIN INTERNATIONAL ENTERPRISE
CORP.
Model: PA-1121-22 (120W); 022720120A (120W)