User's Manual

4
CANADIAN NOTICE
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of the Canadian Department of
Communications.
Le present appareil numerique nemet pas de bruits radioelectriques depassant les limites
applicables aux appareils numeriques de Classe B prescrites dans le reglement sur le brouillage
radioelectrique edicte par le Ministere des Communications du Canada.
POWER CORD REQUIREMENT
The power cord supplied with the AC adapter should match the plug and voltage requirements
for your local area. Regulatory approval for the AC adapter has been obtained using the power
cord for the local area. However, if you travel to a different area and need to connect to a
different outlet or voltage, you should use one of the power cords listed below. To purchase a
power cord (including one for a country not listed below) or a replacement ac adapter, contact
your local dealer.
U.S. AND CANADA
 The cord set must be UL-Listed and CSA-Certified or C-UL Listed.
 The minimum specifications for the flexible cord are (1) No. 18 AWG, (2) Type SJ, and (3)
3-conductor.
 The cord set must have a rated current capacity of at least 10 A.
 The attachment plug must be an earth-grounding type with a NEMA 5-15P (15A, 125V) or
NEMA 6-15P (15 A, 250V) configuration.
JAPAN
 All components of the cord set (cord, connector, and plug) must bear a `PSE` mark and
registration number in accordance with the Japanese Dentori Law.
 The minimum specification for the flexible cord are: (1) 0.75 mm
2
conductors, (2) Type
VCT or VCTF, and (3) 3-conductor.