User's Manual

2
Upgrading the Hard Disk Drive
Replacing the original drive with one of larger capacity can increase the hard drive capacity of
your computer. The computer uses a 9.5 mm (height), 2.5-inch Serial ATA type hard disk.
Be sure to make a backup copy of all your data before attempting this operation.
Hard drive upgrade is a delicate process. Please observe the following instructions
carefully or have a qualified technician install it for you. Damages due to mishandling of
this procedure are NOT covered by the manufacture’s warranty. Apply care when
handling the hard disk.
 Do not drop or apply any shock.
 Do not press on the cover.
 Do not touch the connector with your fingertips.
 Mishandling of the hard drive can result in permanent loss of data. Make a backup copy of
the drive s content before you remove it.
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the AC cord and all cables/devices attached to the
notebook.
2. Place your hand on a large metal object momentarily to discharge any static electricity.