User's Manual

8
BOOT SETTINGS CONFIGURATION
 Quiet boot
Disabled: Display normal POST message.
Enabled: Display OEM logo instead of POST messages.
 Disabled/ Enabled
 Bootup Num-Lock
Select Power-on state for Numlock.
 Off/On
B
OOT DEVICE PRIORITY
 1st Boot Device
Set the type of device for the 1st drive BIOS attempts to boot from.
 2nd Boot Device
Set the type of device for the 2nd drive BIOS attempts to boot from.
 3rd Boot Device
Set the type of device for the 3rd drive BIOS attempts to boot from.
 Removable Dev/CD/DVD/Hard Drive/Disabled
H
ARD DISK DRIVES
 1
st
Drive
Specifies the boot sequence from the available devices.
 SATA: PM-FUJITSU MHV2040BH/Disabled
R
EMOVABLE DRIVES
 1
st
Drive
Specifies the boot sequence from the available devices.
 USB:USB Hotplug FDD/Disabled