User's Manual

■ chapter 4 upgrading your computer
Installing a memory module (DIMM) into the system
To install the DIMM, do the following:
1. Power OFF the notebook. Unplug the AC cord and all
cables/devices attached to the notebook.
2. Place your hand on a large metal object momentarily to
discharge any static electricity. Place the notebook on a flat
surface and fully open the LCD lid.
3. Locate and remove 8 Screw A’s on the Metal Cover.
Sy stem D ev ice Cove r
Scre w A
Screw A
Screw A
4. Remove the Metal Cover. The DIMM socket is now seen
as shown below.
4-7