User's Manual

■ chapter 4 upgrading your computer
Upgrading the Hard Disk Drive
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the AC cord and all
cables/devices attached to the notebook.
2. Place your hand on a large metal object momentarily to
discharge any static electricity.
3. Locate and remove 8 Screw A’s on the System Device
Cover.
Sy stem Dev ice Cove r
Scre w A
Screw A
Screw A
4. Remove the Device Cover.
5. Locate and remove 2 Screw B’s. Gently pull the soft tab
on the HDD module forward to disengage from the HDD
connector and carefully remove the HDD module from
the bay.
4-3