User`s guide

56
4.2.7 SAS Cable Connection
Connector J10 is used to connect SAS cable to each SAS HDD.
4.2.8 Jumper Setting on the SAS BP
Jumper J13, J14 are used to decide which enclosure monitoring controller will use in system.
Default setting is “1-2” for J13 and “1-2” for J14 on-board SAS controller. If you want to use add-on
another SAS controller supporting SES(I2C) interface, you have to set the jumper to “2-3” for J13 and
“2-3” for J14.
Connector Description
J10 SAS Port 0-3
Jumper SGPIO SES(I2C)
J13 1-2 2-3
J14 1-2 2-3