User`s guide

Send Start Unit Command

When set to Yes, the SCSI controller sends the Start Unit command to the specified

SCSI device during bootup. The interface powers up the SCSI device on-at-a-time

during bootup, reducing the load on the computer's power supply.

Setting options: [Yes], [No].

BIOS Multiple LUN Support

Select [Yes] when any SCSI device has multiple logical units.

Setting options: [Yes], [No].

Include in BIOS Scan

Selecting [Yes] allows the SCSI controller to control the SCSI device with its SCSI ID.

When set to [No], the SCSI controller does not control the specified SCSI device by not

scanning for the SCSI ID during bootup, but the boot time will be decreased.

Setting options: [Yes], [No].