Specifications

49
5.1.2 Setting up the BIOS
Be sure to enable the “ n VIDIA RAID Function in n VIDIA RAID Setup of Integrated Peripherals” in BIOS
before configuring the NVRAID BIOS. After that press F10 to save the configuration and exit. The server will
reboot right away. Then enter the RAID BIOS setup by pressing F10 when prompted, and follow the procedures
described below to setup up the NVRAID BIOS.
NVRAID BIOS setup lets you choose the RAID array type and which hard drives you want to make part of the
array.
① Start your computer, then press “F2” to enter the BIOS setup. Use the arrow keys to select Integrated
Devices, then, press Enter.
② Use the arrow keys to select the NV RAID Configuration (see the picture), then press Enter.
③ From the NV RAID Configuration window, "enable" the RAID Enable, the other items would be light, then you
can enable the disk that you want to use as RAID disks.
④ Press F10 to save the configuration and exit.