User Manual

Table Of Contents
65
Email
After Email is enabled as a triggered action (in Trigger Actions windows)
and configured properly, the NVR sends an email notification to
specified email address(es) if an alarm occurs within the time period(s)
set in the arming schedule. The email contains basic alarm information
such as alarm type, alarm time, camera ID, and camera name, etc.
Before using this function, make sure the NVR has a functional
connection to an SMTP server with which you have a valid email account.
Depending on the intended recipients, a connection to the Internet may
be required.
Only certain NVR models support this function.
1. Click System > Network > Email.
2. Configure the related parameters. If server authentication is
required, you need to enter the correct username and password.
Click Test to send a test email.