User Manual

Table Of Contents
57
Illegal Access: A failed login attempt for a username that does not
exist or a password that is incorrect.
Network Disconnected: Network connection is lost.
IP Conflict: Devices on the network use the same IP address.
Recording Abnormal: Storage resource cannot be found, for
example, when all hard disks are removed.
Perform the following steps to configure an alert:
1. Click Alarm > Alert.
2. Select an alert type, select the desired actions, and then select the
camera(s) for which you want to enable alarm output.
3. Click Apply to save the settings.
Buzzer
The buzzer can be triggered by alarms to alert the user. Follow the steps
to set how long the buzzer will buzz after it is triggered.
1. Click Alarm > Buzzer.
2. Set the duration as needed. The range is from 1 to 600 seconds.
3. Click Apply to save the settings.