User Manual

Table Of Contents
55
NOTE!
The number of cameras that can be connected may vary with NVR
model.
Actions that can be triggered may vary with alarm type.
5. (Optional) Click right to Arming Schedule and then set the time
when actions will be triggered.
NOTE!
The default schedule is 24×7. You may change it as needed and set
up to eight different periods for each day. Time periods cannot
overlap.
To apply the same arming schedule to other days, select the
intended days right to Copy To.
6. Click Apply to save the settings.
7. (Optional) Click Copy to apply the same settings to other cameras.
Tampering Detection
A tampering detection alarm occurs when the camera lens is covered.
1. Click Alarm > Tampering.
2. Select the desired camera and then select Enable to enable
tampering detection.