Quick Start Guide
Table Of Contents
- 01-Front Cover
- 02-Title Page
- 03-Body
- 1 Appearance Description
- 2 Mount Your Camera
- Hardware Installation
- Waterproof Measures
- Waterproof Components for RJ45 Plug
- 1. Attach the seal ring to the network interface.
- 2. Mount the waterproof components. You can crimp the inner wires of the cable with the RJ45 plug first and then cover the waterproof components. You may also cover the waterproof components first.
- 3. Insert the cylindrical waterproof ring into bolt.
- 4. Insert the cable into the network interface and screw the waterproof bolt in.
- 5. Screw in the waterproof bolt lid.
- 6. Finish the waterproof installation.
- Waterproof Tail Cable
- Waterproof Components for RJ45 Plug
- 3 Set Your Camera over the LAN
- 4 Access Your Camera
- 04-Back Cover
16
For your first login with Windows 7, if the system does
not prompt you to install ActiveX, follow these steps to
turn off UAC: click the Start button, and then click
Control Panel. In the search box, type uac, and then
click Change User Account Control Settings. Move the
slider to the Never Notify position, and then click OK.
After UAC is turned off, log in again.
If the installation failed, open Internet Option in IE
before login. Click the Security tab, click Trusted sites,
and then click Sites to add the website. If you use
Windows 7, you need to save the setup.exe to your PC
first, and then right-click the file, select Run as
administrator, and then install it according to
instructions.