Quick Start Guide
Table Of Contents
- 01-Front Cover
- 02-Title Page
- 03-Body
- 1 Appearance Description
- 2 Mount Your Camera
- Hardware Installation
- Waterproof Measures
- Waterproof Components for RJ45 Plug
- 1. Attach the seal ring to the network interface.
- 2. Mount the waterproof components. You can crimp the inner wires of the cable with the RJ45 plug first and then cover the waterproof components. You may also cover the waterproof components first.
- 3. Insert the cylindrical waterproof ring into bolt.
- 4. Insert the cable into the network interface and screw the waterproof bolt in.
- 5. Screw in the waterproof bolt lid.
- 6. Finish the waterproof installation.
- Waterproof Tail Cable
- Waterproof Components for RJ45 Plug
- 3 Set Your Camera over the LAN
- 4 Access Your Camera
- 04-Back Cover
12
2. Use EZStation to search online cameras automatically.
3. Modify the camera settings if necessary, including its IP
address and subnet mask.
The default IP address is “192.168.0.13”. The default
username is “admin”, and the default password is
“123456”.
To access your camera from a different subnet, set the
gateway for your camera after you log in.
4 Access Your Camera
For an IP camera, you can directly control and manage it through
the web on a PC.