Quick Start Guide
Table Of Contents
- 01-Front Cover
- 02-Title Page
- 03-Body
- 1 Appearance Description
- 2 Mount Your Camera
- Hardware Installation
- Waterproof Measures
- Waterproof Components for RJ45 Plug
- 1. Attach the seal ring to the network interface.
- 2. Mount the waterproof components. You can crimp the inner wires of the cable with the RJ45 plug first and then cover the waterproof components. You may also cover the waterproof components first.
- 3. Insert the cylindrical waterproof ring into bolt.
- 4. Insert the cable into the network interface and screw the waterproof bolt in.
- 5. Screw in the waterproof bolt lid.
- 6. Finish the waterproof installation.
- Waterproof Tail Cable
- Waterproof Components for RJ45 Plug
- 3 Set Your Camera over the LAN
- 4 Access Your Camera
- 04-Back Cover
2
No.
Description
No.
Description
Power interface (12 VDC)
Ethernet interface
For the latest specifications, see the product datasheet.
2 Mount Your Camera
You can use ceiling mount or wall mount, but you need to buy the
mount accessories separately. Make sure that the ceiling or wall
can hold the weight of the camera. The steps for ceiling mount
and wall mount are similar. The following takes ceiling mount as
an example.
Hardware Installation
Ceiling Mount
1. Attach the sticker to ceiling, and then drill holes according to
the sticker.