Quick Start Guide
Table Of Contents
- 01-Front Cover
- 02-Title Page
- 03-Body
- 1 Appearance Description
- 2 Mount Your Camera
- Hardware Installation
- Waterproof Measures
- Waterproof Components for RJ45 Plug
- 1. Attach the seal ring to the network interface.
- 2. Mount the waterproof components. You can crimp the inner wires of the cable with the RJ45 plug first and then cover the waterproof components. You may also cover the waterproof components first.
- 3. Insert the cylindrical waterproof ring into bolt.
- 4. Insert the cable into the network interface and screw the waterproof bolt in.
- 5. Screw in the waterproof bolt lid.
- 6. Finish the waterproof installation.
- Waterproof Tail Cable
- Waterproof Components for RJ45 Plug
- 3 Set Your Camera over the LAN
- 4 Access Your Camera
- 04-Back Cover
i
Contents
1 Appearance Description ......................................................... 1
Dimensions and Appearance ................................................... 1
Camera Structure ..................................................................... 1
2 Mount Your Camera .............................................................. 2
Hardware Installation .............................................................. 2
Ceiling Mount ...................................................................... 2
Start the Camera ................................................................. 5
Waterproof Measures .............................................................. 6
Waterproof Components for RJ45 Plug .............................. 6
Waterproof Tail Cable ......................................................... 8
3 Set Your Camera over the LAN .............................................. 11
4 Access Your Camera .............................................................. 12
System Requirements for Your PC ......................................... 13
Access Your Camera ............................................................... 14