Manual

26
4B Use of the Mod. Easy Machine
4B.1 - Mod Easy Control Panel Legend
1. ON-OFF
- Turning the machine on and off:
briefly pressthe ON button
pressthe OFF button for 3 sec.
- Interruption of work phase:
During the work phases, if pressed, it stops the processing and passes to the next one.
- Vac Time or Seal Time Selection:
when in the ON mode, if pressed,it allows you to move the arrow in order to select
Between VacTime and Seal Time (for their modification use keys 2 and 3 to
increase or decreasetheirvalues)
Note: the software always saves the latest change.
2. Increase the Selected Values
- Press to increase the values previously selected:
Adjustable values: vacuum packing time; seal time or external vacuumpacking time
- When in the OFF mode, if pressed for 3 times in a row,the pre-heating cycle or
expulsion of water residues from the oil pump will be started
To be performed after vacuum cycles with liquid products, or every 15 days.
The duration of the cycle is 15 minutes and can be interrupted by pressing the 1 button
NB This should be always performed with the suction cap closed (turn the
cap to close the slots)
3. Decrease the Selected Values
- Press to decrease the values previously selected:
Adjustable values: vacuum packing time; sealing time or external vacuum packingtime
Pressing buttons 2 and 3 simultaneously switching from vacuumpacking chamber
mode to external vacuum packing mode in a cyclic modality.
4. Analog Display
- It allows the working modalities to be viewed:
OFF
chamber vacuum packing
external vacuum packing
pre-heating or expulsion of water residuals
Vacuum percentage

14 3 2
Fig. 4B.1.1