Manual

14
Before carrying out any check that leads to the removal of some items, the plug
must be removed from the mains electricity.
3.3.1 - Disposal of the packaging
The packaging materials such as cardboard, nylon and wood are products similar
to solid urban waste. They can therefore be disposed of freely.
Nylon is a pollutant, which produces toxic fumes if burned.
Do not burn and disperse in the environment, but dispose according to the Laws in
force.
If the machine is in a country where there are particular regulations, dispose of the
packaging in compliance with that described by the Standards in force.
3.4 - Connections
Before start-up, check the oil level via the control window present on the pump.
Before connecting the packaging machine, make sure that the plate data
correspond with that of the mains electricity.
The plate is on the rear of the machine.
When the level has been checked and everything closed, connect the plug to the
120V or 220V socket.
In the event of incompatibility between the socket and plug, have the socket
replaced with a suitable one by professionally qualified staff.
In particular, the latter must check that the section of the cables is suitable for the
input power of the machine. In general, the use of adapters, multiple socket outlets
and/or extensions is not recommended.
Whenever their use is indispensible, only simple or multiple adapters and
extensions must be used that are in compliance with Safety Standards in force;
however paying attention not to exceed the capacity limit in terms of current value,
and the maximum power value marked on the multiple outlet.
Fig. 3.4.1
MAX
MIN