Manual

Page 12
7.4 HOW THE COMMAND KEYPAD WORKS
7.4.2 CHANGING THE WORKING TIMES
To change the working times of the program selected, press knob "e" once.
The screens appear in sequence as in the figures below.
e
t 1 (pressing time)
T h e r e l e v a n t d i s p l a y i s
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.
t 2 (cutting time)
T h e r e l e v a n t d i s p l a y i s
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.
At this point, the machine returns to display the program (all the values are highlighted) and is ready for
the working cycle with the selected program. See figure below
7.4.1 WORK PROGRAM SELECTION
To select the program to work with, turn the knob to the right or left or increase or decrease the program
number.