Manual

Pagina 12
7.4 HOW THE COMMAND KEYPAD WORKS
7.4.1 WORK PROGRAM SELECTION
To select the program to work with, keep the knob pressed for 3 seconds (the display highlights relating
to the program); turn the knob to the right or left to increase or decrease the program number. Once the
work program is chosen, confirm by pressing the knob once.
At this point, the machine returns to display the program (all the values are highlighted) and is ready for
the working cycle with the selected program. See figure below
7.4.2 CHANGING THE WORKING TIMES
e
To change the working times, keep knob "e" pressed for 3 seconds (the program number is highlighted).
Select the program number, keep the knob to change the individual working times pressed for another 3
seconds with the procedure described below.
t 1 (pressing time) *
T h e r e l e v a n t d i s p l a y i s
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.
t 2 (rounding time) **
T h e r e l e v a n t d i s p l a y i s
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.
t 3 (shaping chamber) ***
T h e r e l e v a n t d i s p l a y i s
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.