Manual

ROTORBAKE Series Ovens - electric version - Page 10
D ISMANTLING
When the machine is stopped for demolition,
proceed as follows:
- The power water supply must be
completely disconnected by qualified
personnel.
- A company that is authorized for the disposal of
waste materials must perform demolition of the
oven. The company will carry out the procedure
of dismantling it, separating the materials
according to type and provide for their delivery to
their final destination.
-The insulating material contained in the wall
space inside the machine and in the access door
must be collected in sturdy plastic bags and
stored in special waste disposal facilities
- To remove the door from its housing, unscrew
the bolt 1 and remove the plate 2.
- Unscrew the inside; remove the lower gasket; detach the frames and remove the gasket and glass
from the door.
- Detach the inside panel of the door and remove the insulating material.
The insulating material in the wall spaces of the machine may irritate the skin and
respiratory tract on contact.
We recommend wearing protective clothing including a mask and gloves.
DOOR