Manual

ROTORBAKE Series Ovens - electric version - Page 44
to start the program, press:
When these steps are completed, the oven begins the program starting with preheating,
after which the oven will beep intermittently.
The oven is now ready to begin baking; insert product.
As soon as the door is closed again, the baking stages will automatically begin using the
parameters set in the program. This will be confirmed when by the lighted LED:
!
Warning:
One or more parameters may be changed for any baking stage in progress; the
change will be effective only for the current baking session and is not saved to the
program.
Example: While baking with program number 5, you wish to change the temperature during
the first baking stage from 190 to 210 degrees:
Press the keys:
Press the keys: to prevent changing the SP temperature for the
preheating stage
Enter 210 on the numerical keypad, and make sure that the temperature display reads:
then save by pressing:
    
    
  
   



