Manual

ROTORBAKE Series Ovens - electric version - Page 37
Setting up a program:
Choose the program to set:
Press the following keys consecutively:
Press the number of the program to be saved:
Then the key:
This will take you to the set point of the selected program, whose number will be flashing
on the program display.
EXAMPLE:
The first parameters to be saved are those for the baking temperature.
Therefore, press the keys:
to enter the temperature set point.
The first temperature to enter is for the SP phase (oven preheating), which is usually 50
degrees above the ideal baking temperature.
Then enter the temperature on the numerical keypad; e.g., 250°. The flashing SP LED will
show this. Make sure that the temperature display reads:
then save the preheating temperature using the key:
Once this step is complete, you may move on to set the SP1 temperature of the first baking
stage, e.g. 190°.
Make sure that the temperature display reads:

 
   
  




   