Manual

ROTORBAKE Series Ovens - electric version - Page 36
 "#  $%&& ! '
The Oven:
The BAKE OFF 100 PROGRAMS MODEL is an oven designed to facilitate and maximize
baking various products, such as all kinds of breads, pastries, pizza, etc.
Its computerized technology allows it to memorize up to 100 programs for baking the same
number of different products, maximizing all of the parameters that may change for baking
each.
Once all useful programs have been set, the operator need only call up the corresponding
program number and bake.
The oven uses an internal clock, and may therefore be started at a pre-set time so that, for
example, the operator can find the oven at temperature upon arriving at work.
Information about the Programs:
Before setting the final baking programs, it is best to read the entire paragraph about using
the oven.
Each program is divided as follows:
SP 

 OVEN PREHEATING
SP1 

 INITIAL BAKING PHASE
SP2 

 SECOND BAKING PHASE
SP3 

 FINAL BAKING PHASE
The time, baking temperature and any steam injections at the start of each phase may be
programmed for each baking phase.
Each program also controls 2 timed open-close phases of the flue valve to evacuate
baking steam.
How to Set Up the Programs:
Make sure that the oven has been properly connected, then turn the main switch G and
turn on the computerized oven control by pressing the key:

 