Manual

ROTORBAKE Series Ovens - electric version - Page 34
AUTOMATIC TIMED PREHEATING
One of the features of the 10 Programs Extra Electronic model ovens is that the oven can
be preheated at a preset time, so that the operator can find the oven already at the
required temperature when he arrives at work.
First the clock has to be set.
Press key T for at least 5 seconds, the display H will start to flash on the hour figure,
indicating the existing set point, use the (+) key O, and the (-) key M to modify the setting
and then memorize the hours by pressing the Enter key P; the minutes will now start to
flash, indicating the existing set point; use the (+) key O, and the (-) key M to modify the
setting and then memorize the minutes by pressing the Enter key P again.
To conclude, the display will flash indicating the day of the week with a number (e.g.
Monday = 1, Tuesday = 2 .....) modify using the (+) key O, and the (-) key M, then confirm
by pressing the Enter key P.
Stop all oven functions by pressing the Stop key U.
To set the starting time for automatic preheating, press the Enter key P, and the Clock key
T, in that order, the display H will start to flash on the hour figure, indicating the existing set
point, using the (+) key O, and the (-) key M, to modify the setting end then memorize the
hours by pressing the Enter key P.
The minutes will now start to flash, undemanding the existing set point, using the (+) key O,
and the (-) key M, to modify the setting end then memorize the hours by pressing the Enter
key P again.
The display H will mow show the number of days’ delay before the timed start-up (e.g.
today = 1, tomorrow = 2 ......); to modify use the (+) key O, and the (-) key M, then confirm
the setting by pressing the Enter key P.
To allow use of this function, the oven must continue to receive power and the main switch
G must be left turned to ON.
Then select the baking program to be carried out at start-up, as explained previously, and
press the clock key T and the Start key S, in that order.
If this function has been set correctly, the led on the Start key S will flash and the Time
display H and the Steam display I will switch off, while the temperature and the program set
will continue to be displayed on the displays F and L respectively.
When the preset time is reached, the oven will come into operation and heat to the
preheating temperature; to start the baking program as such, simply open the door and
place the product inside.