Manual

ROTORBAKE Series Ovens - electric version - Page 25
ROTARY RACK
Insertion
- Make sure manual damper is closed.
- Set the timer on the steam control.
- Open the door completely.
- Ascertain that the steam suction fan goes on.
- Push rack into oven make sure rack is locked into position.
- Close and lock the door handle.
Removal
- A sound signal goes off at the end of the baking time.
- Start the removal procedure performing the following operations in the order listed:
- Open the manual steam vent.
- Unlock and open the door partially to allow any residual steam to be eliminated by the
suction unit.
- Holding the START button “T” down, rotate the cart to the extraction position.
- Open the door completely and, wearing heat resistant gloves, extract the rack.
- Close and lock the door.