Manual

Page 27
when the door will be closed, the program will start the baking cycle. This operation can be selected or
deselected accordingly to the User’s needs in the programming phase or while modifying a program.
Time parameter – it manages the various baking times and allows to set the Multi-Timer mode.
By scrolling until position INF, the time becomes endless.
Temperature parameter – it manages the temperature settings set up for a baking program
Fan Speed parameter – it manages the set up of the desired fan speed for the baking mode to be
used:
 5 – high speed
 4 – medium speed
 3 – low speed
 2 – medium speed, semi-static
 1 – low speed, semi-static
The semi-static mode stops the fans once the set-point temperature is reached and reactivates them at
every starting of the heating elements, so that the temparature in the baking chamber remains constant. In
this mode the User will obtain a baking result comparable to a baking in a static oven. The use of the semi-
static mode will be underlined by the lighting of the writing “Pulse” on the display.
Climate parameter – this parameter manages the level of steam injection related to the baking
cycle, and will therefore create a dry or humid climate in the baking chamber accordingly to the User’s
needs.
Steam Injection parameter – this parameter allows to obtain a temporized steam injection in every
moment during the baking cycle on User’s request.
Insertion from keyboard – this option is available during the modification of the
parameters Time , Temperature , Steam injection . Touching the
icon, the following screen will be displayed, allowing the insertion of the
numerical values from keyboard.
RDRG