Manual

Page 20
 Now you can start programming the Steps: the “Step 1” icon comes on to indicate the first sequence
of parameters that will make up the program. Set each parameter, confirming the value with the
key.
 To move from one “Step” to another, press the key.
 Once the setting of the desired Steps (max 5) has been completed, the program can be stored by
pressing the key for 3 seconds. The buzzer confirms the performed operation.
 The next phase consists in naming the program which has just been stored. The legend “name”
appears on the display. Scroll through the letters using the “+” and “-“ keys, moving on to the next
one with the key. You will have 16 characters available. Once the procedure is finished, confirm
the operation by pressing the key for 3 seconds.
EXECUTING A CUSTOMIZED PROGRAM:
To execute a program stored by the user, proceed as follows:
 Press the key and use the “+” and “-“ keys to select the desired program. Confirm the selection
by pressing the key. Then press the key to execute the baking program. During execution of
the program, the baking parameters will not be modifiable. You can stop the baking cycle before it's
programmed to end simply by pressing the key for 3 seconds.
To exit the menu, press the key. In this manner, you will return to the main menu of the control.
PRESET PROGRAMS:
The electronic control of the Mistral Series ovens contains 12 preset baking program which are suitable for
cooking various types of food. These programs can be called up using the following procedure:
 Press the key and select the desired baking program using the “+” and “-“ keys. Confirm the
selection by pressing the key.
 Select the degree of baking, increasing or decreasing it (using the keys “+” and “-“, within the range
permitted by the program), the baking parameter will flash as follows.
Thus using the “+” and “-“ keys, you can change the parameter set by the program.
 Press the key to confirm the modification of the baking time. The aforesaid setting will be
effective for this baking cycle only. To make the program change permanent, on the other hand,
press the key for 3 seconds. The successful modification will be indicated by an acoustic signal.
 To start execution of the program, press the key. During execution of the program, the baking
parameters will not be modifiable. You can stop the baking cycle before it's programmed to end
simply by pressing the key for 3 seconds.
 To exit the menu, press the key. This way, you will return to the main menu of the control.
Depending on the cooking mode set in the program, during the cooking cycle of the oven, only the time (or
the temperature, in case of probe sensor) will be displayed on display 1.
RDRG