Manual

RDRE - electric version - gas version - Page 38
Use the arrow buttons to move through the lines and the Slider to scroll the specific letters. Confirm every digit
with the button . At the end press the button OK in the keyboard and confirm always with the button . Now
the display will show the filtered recipes.
ALARM CODES:
The error messages provided by the electronic control in case of operating anomalies are
listed below. When one of the following errors is displayed, with the exception of error 009 which
is self-resetting, you must contact your nearest customer service centre.
Er. 001 = the power board gives no feedback
Er. 002 = wrong firm-ware
Er. 003 = probe alarm: a probe is disconnected or short-circuited
Er. 004 = heating element anomaly
Er. 005 = program memory not working
Er. 006 = program for delayed start removed after setting
Er. 007 = blackout error: the baking could not resume after a blackout
Er. 008 = no network synchronism: the frequency of the network is unstable, or the power board is faulty.
Er. 009 = motor thermal protection: the power board has blocked the oven because of excessive heating of the
motor. Once the anomaly is resolved, the oven returns operational.
CLEANING AND CARE
!
Attention!
The unit must never be cleaned using a high-pressure cleaner or direct jets of water.
During cleaning, disconnect the power supply to the oven.
Clean the unit after it has cooled off.
Do not use cold water on the glass parts of the door if they are hot.
The oven must be cleaned on a daily basis!
The steel outer surface of the oven may be cleaned with a damp cloth. You can also use normal commercially
available detergents. Dry afterwards. It is not advisable to use scratching, abrasive or corrosive products as they
may damage the surfaces. Further care may be taken by using products that are specifically for cleaning steel. In
this case, follow the instructions shown on the product.
For cleaning the cooking chamber, it is advisable to use specific sprays for cleaning ovens. Also in this case,
comply with the instructions of the manufacturer of the product.
Do not use harmful cleaning products for this phase.
WHAT TO DO IN CASE OF PROBLEMS
Even if the oven is being used correctly and there are problems with it, close all connections and contact an
authorized technician from the customer service centre.