- American Standard Lifetime Specification Sheet

ManualsBrandsUnivex ManualsHot TubLifetime 7236L.002

HD-3

LIFETIME™ 6' X 36"

Comfortable bathing design with form-tted backrest

and molded-in armrests.

❏ Model# 7236L (specify color)

• Acrylic with berglass reinforcement

• Lifetime Overow Drain for maximum

water depth

• 2.1 HP self-draining pump/motor

• Ten ow adjustable jets including:

Two adjustable Ideal Flow Comfort Jets™

Eight adjustable Comfort Jets™

• Three silent air volume controls

• Side-mounted On/Off control

• Complete factory installed and tested

whirlpool system

• Self leveling feet

• Designed with undermount installation option

❏ Model# 7236LC (specify color)

• Same as above with the EverClean™ whirlpool

system. The EverClean™ antimicrobial system

incorporates AlphaSan®, a patented

antimicrobial agent manufactured right into the

circulation system components, which

suppresses the growth of unsightly algae,

fungus, mold and mildew.

❏ Model# 7236L.002 Bathing Pool Only

Nominal Dimensions:

72” x 36” x 21-1/4”

(1829 x 914 x 540mm)

Compliance Certications -

Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

AND PRODUCT SPECIFICATIONS

LIFETIME™ 6' X 36"

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

Components Required:

❏ Bath Filler*: (specify nish)

❏ Bath Drain: 1599.205.XXX (specify color)

OR 1599.500.020 (white only)

Custom Accessories Available:

❏ Six Foot Apron: 9271.019.XXX (specify color)

❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100

❏ Tile Bead Kit: TILE-BEAD

Revised 7/07

For color/nish availability and other faucet choices, please

see the Product Selector and Pricing Guide.

NOTE: E-Z-Install™ Whirlpool Heater is designed to

maintain water temperature during operation. It will not heat

cold water to desired bathing temperature.

* See American Standard Faucet Selector

AlphaSan® is a registered trademark of Milliken & Co.

Summary of content (2 pages)

PAGE 1
LIFETIME™ 6' X 36" WHIRLPOOLS BY AMERICAN STANDARD HIGH GLOSS ACRYLIC LIFETIME™ 6' X 36" Comfortable bathing design with form-fitted backrest and molded-in armrests. ❏ Model# 7236L (specify color) • Acrylic with fiberglass reinforcement • Lifetime Overflow Drain for maximum water depth • 2.
PAGE 2
LIFETIME™ 6' X 36" WHIRLPOOLS BY AMERICAN STANDARD HIGH GLOSS ACRYLIC 72" (1829mm) 11" (279mm) 7-3/4" (197mm) 13-3/4" (349mm) 3" (76mm) 6" (152mm) 36" (914mm) CUT OUT IN FLOOR FOR DRAIN 36" (914mm) C/L OF OVERFLOW 21-1/2"(H) (546mm) 20-1/8"(A) (511mm) 20"(C) (508mm) DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7. GENERAL SPECIFICATIONS FOR 7236L WHIRLPOOL INSTALLED SIZE 72 x 36 x 21-1/2 In.