Manual

9
Fig. n°25
Fig. n°26
 Do not expose the blender to noxious agents such as
the sun, the rain, splashes, humidity, frost (Fig. 25).
 Do not pull the feeding cable to unplug (Fig. 26).
 Check the status of the feeding cable on regular basis
as a worn out cable or imperfect presents serious elec-
trical dangers.
 If the machine remains unutilised for a long time, have
it checked by an Customer Service Centre before us-
ing it.
 If the machine shows signs of malfunctioning, it is rec-
ommended to switch it off, not to use it and not to in-
tervene directly.
 to repair it and call the Customer Service Centre
whose details can be seen at the back of this manual.
 In case of fall or immersion of the blender, do not use
it and contact CUSTOMER SERVICE immediately to
have a detailed check.
 Do not leave the dipping blender plugged in point-
lessly. Unplug it when not using the machine. (Fig. 29)
 Do not hang f handle the dipping blender by means of
the feeding cable (Fig. 27).
 Even if the machine is built according to the enforcing
laws, there are some dangerous zones. Therefore, it is
recommended to avoid to approach the hands to the
blades or other parts in movement (Fig. 28).
 Do not posture in such a way that might lead parts
of the body in direct contact with the bla des.
Fig. n°27
Fig. n°28
Fig. n°29