Manual

Disassembly of the shaft (Fig. 64)

1. Detach the shaft from the engine’s body and position it on a surface with the knives on the right side.

Predispose the tools (a-b), grip the tool (b) with the left hand and insert it in the dragging device inside the shaft

ATTENTION: Using a key (a), unscrew clockwise till the blade group is removed.

4. Remove the inner shaft from the main shaft pushing it towards the tool (b).

5. Proceed to clean the single pieces with a dump cloth and some dish detergent, keeping in mind that the bearings

must not come into contact with liquids.

6. In case of encrustation, insist with the cloth. Do not use abrasives, pointy or sharp tools.

7. Disassemble everything the opposite way. ATTENTION: fix firmly the knife or this could detach itself during the oper-

ating stage.

Fig. n°64

(b)

(a)