Manual

19
the complete cleaning.
Intervene manually on the parts that are still dirty, pay-
ing attention to the internal area of the whip’s body
(Fig. 60)
ATTENTION: Whips can be dangerous when handles
with bare or wet hands. Wear protective gloves and
pay maximum attention anyway.
Reuse the tool for another operation assembling the
whips to the whip’s engine or:
7) Dry the whip’s body with a cloth position it vertically for
1 or 2 hours to ease the drainage of residual liquid
(Fig. 58).
8) Hence place the assembled whip on the special wall
bearing (Fig. 58).
The whips (Fig. 30 - ref. 19) can be washed even by the
dishwasher.
ENGINE’S BODY:
1. unplug the feeding cable from the net to insulate the
machine from the electrical feeding completely (Fig.
61)
2. Remove possible product splashes that deposited on
the machine’s body with a wet sponge and dry imme-
diately with a cloth.
3. Check that no residual from the work nor liquid did not
enter the cone fixing the tools and in such case re-
move them with a cloth.
Reuse the blender to another operation or:
4. Position the engine’s body on the special wall bearing.
6.2 - EXTRA CLEANING
6.2.1 - GENERAL INFORMATION (Fig. 63)
 Such operation is an exclusive requirement of this ma-
chine.
 This operation is to be carried out only in case of poor
cleaning tasks executed by previous operators or in
case unpleasant smells, internal encrustations, etc.
can be perceived.
 This operation is quite delicate and particular even if
simple and could compromise the functioning of the
machine. Therefore, it is recommended to have it car-
ried out only by responsible and expert members of
staff.
 ATTENTION: this operation exposes the operator to
risks due to the manipulation of knives and sharp
parts. Hence, it is recommended to use protective
gloves and to be extremely careful all the time.
(1) (2)
(3) (4)
(5)
Fig. n°59
Fig. n°58
a)
b)
Fig. n°61
Fig. n°63
Fig. n°60
Fig. n°62