Manual

14
ACCESSORIES ASSEMBLY:
The tools must be installed on the engine’s body when
the machine is unplugged.
All the dipping blender’s tools are perfectly interchange-
able. However, they might differ according to the model,
date of production, producer. Hence, it is recommended
to keep separate the various accessories of other dipping
blenders.
ENGINE’S BODY - SHAFT (Fig. 36)
Grip the engine’s body by the handle, grip the shaft with
the other hand. Align the shaft’s rung to the clutch of the
machine’s body (1). Insert the shaft deeply (2) and rotate
it of about 90 degrees anticlockwise till the shaft is firmly
blocked to the machine(3). The catch will fit the engine’s
body reference.
ENGINE’S BODY - WHIP (Fig. 36)
Grip the engine’s body by the handle, grip the whip with
the other hand. Align the shaft’s rung to the clutch of the
machine’s body (1). Insert the shaft deeply (2) and rotate
it of about 90 degrees anticlockwise till the whip is firmly
blocked to the machine(3). The catch will fit the engine’s
body reference.
WHIP’S DISASSEMBLY (Fig. 37)
The stainless steel whips can be disassembled from the
body. Wear protective gloves. Hold the body firmly with
one hand and with the other one grip the whip by the
hooking base and pull towards the opposite direction with
strength but without wrenching it till the piece is subdi-
vided into two pieces (2). Proceed in the same way with
the other whip (4).
In order to disassemble do the opposite.
CHAP. 5 - USE OF THE MACHINE
(1) (2)
(3)
(4)
(5)
(1) (2)
(3)
Fig. n°36
Fig. n°37