Manual

12
Fig. n°33
4.2 - IN-BUILT SAFETY DEVICES
4.2.1 - Mechanical safety devices
As far as mechanical-nature safety, the dipping blender
described by this manual complies to:
- UL 763 machine directives;
- the CSA 22.2 norm.
The dipping blender is provided with:
- Whip-protecting bell (Fig. 32 –ref.b)
- Shaft-protecting bell (Fig. 32 – ref.a)
- Dragging device inserted engine’s stem (Fig. 33)
- Anti-accidental switching handle (Fig. 34)
- Respect of the minimum space to grip the machine as
per what is prescribed by law
- Maximum liquid level marked on the shaft (Fig. 45)
4.2.2 - Electrical safety devices
As far as electrical-nature safety, the dipping blender de-
scribed by this manual complies to:
- UL 763 machine directives;
- the CSA 22.2 norm.
Therefore the dipping blender is provided with:
- Double-insulating system to guarantee that all the de-
tails that might come in contact with the operator are
not subject to tension not even in case of breakdown.
- Safety device against accidental switching on (Fig. 34)
- Internal components protection from liquid splashes
- Although the dipping blender is provided with the elec-
trical and mechanical measures (operating during the
working phase and during cleaning and maintenance)
as per the enforcing laws, there are some RESIDUAL
RISKS that cannot be eliminated completed. These
are recalled by this manual under the titles ATTEN-
TION. They concern the danger of cut, contusion and
else that is provoked by the blade and the dragging
device, by the whip and by other components of the
machine or by electrocutions.
Fig. n°34
Aspiration
grill air
Escape grill
air
Fig. n°32
(a)
(b)
Fig. n°31