Manual

B6TTR-B10TTR – page. 61
IMPORT/EXPORT OF BAKING PROGRAMS:
With the ovens of the Series Best For it is possible to export the stored programs and import new
ones through external storage units, such as USB memory sticks. The USB connection to
the oven occurs through the appropriate adapter card connected to the serial port on the right side
of the oven.
Once the connection has been made, the electronic control recognizes the peripheral device
automatically and enables the appropriate management menus. When disconnected, the above
mentioned menus are disabled.
PRESET PROGRAMS MANAGING MODE:
With the USB memory stick connected, press the key . The normal menu now also contains
the Programs Management menu. Operation of the remaining selections of the menu will remain
unchanged.
To access the programs management menu, go to the respective item and press the key . The
items described here below are disabled if the “Locked Programs” option is activated in the oven
parameters.
The menu is structured as follows:
DELETE = allows you to delete a preset program stored in the oven. Enter the option
by pressing the key . Scroll through the programs list (the “Temperature” display
will suggest the writing “Del”), select the program to be deleted by using “+”
and “-“ keys and, once positioned on the selected program, press the key . for 3
seconds. The program will then be deleted. The display will show the writing “******”
during this operation. The end of this operation will also be indicated by an acoustic
signal. Repeat the same operation for all the programs you would like to delete.
To exit the “Delete” menu, press the key .
By pressing the key for 3 seconds the procedure is interrupted and the electronic controls gets
back to the main visualization.
IMPORT = allows you to import all the preset programs saved in the oven on the USB memory
stick. The files will have the extension .ppf and will be stored in the predefined “Univex” folder.
The memory of the electronic control allows you to store up to 60 programs. Select the “Import”
item using the key and all the programs on the memory stick will be stored in queue after the
existing programs. The display will show the writing “******” during the entire operation, which is also
indicated by an acoustic signal.
The message “Operation execution error” appears in case of incorrect access to the USB memory
stick.
The message “Invalid program file” appears in case of incorrect file dimensions or if the file is
corrupted.