Manual

B6TTR-B10TTR – Page. 56
 Once the setting of the desired Steps (max 5) has been completed, the programme can be
stored by pressing the key for 3 seconds. The buzzer confirms the performed
operation.
 The next phase consists in naming the programme which has just been stored. The legend
“name” appears on the display. Scroll through the letters using the “+” and “-“ keys,
moving on to the next one with the key. You will have 16 characters available. Once
the procedure is finished, confirm the operation by pressing the key for 3 seconds.
EXECUTING A CUSTOMIZED PROGRAMME:
To execute a programme stored by the user, proceed as follows:
 Press the key and use the “+” and “-“ keys to select the desired programme. Confirm
the selection by pressing the key. Then press the key to execute the baking
programme. During execution of the programme, the baking parameters will not be
modifiable. You can stop the baking cycle before it's programmed to end simply by
pressing the key for 3 seconds.
To exit the menu, press the key. In this manner, you will return to the main menu of the
control.
PRESET PROGRAMMES:
The electronic control of the Mistral Series ovens contains 12 preset baking programmes which are
suitable for cooking various types of food. These programmes can be called up using the following
procedure:
 Press the key and select the desired baking programme using the “+” and “-“ keys.
Confirm the selection by pressing the key.
 Select the degree of baking, increasing or decreasing it (using the keys “+” and “-“, within
the range permitted by the programme), the baking parameter will flash as follows.
Thus using the “+” and “-“ keys, you can change the parameter set by the programme.
 Press the key to confirm the modification of the baking time. The aforesaid setting will
be effective for this baking cycle only. To make the programme change permanent, on the
other hand, press the key for 3 seconds. The successful modification will be
indicated by an acoustic signal.