Manual

B6TTR-B10TTR – Page. 52
SETTING THE LANGUAGE:
The first thing to do is to set your language, as described below:
Scroll through the Main Menu with the “+” key until reaching “Settings”. Enter the Menu with the
key Scroll through the Settings Menu again with the “+” key until reaching “Language”. Enter the
selection by pressing the key. Use the “+” and “-“ keys to select the desired language and
confirm by pressing the key.
Setting the time:
Scroll through the Main Menu with the “+” key until reaching “Settings”. Enter the Menu with the
key Scroll through the Settings Menu again with the “+” key until reaching “Time”. Enter the selection
by pressing the key.
Press the “+” key until the current time is displayed, then confirm by pressing the key.
CHARACTERISTICS OF PROGRAMMES IN PROGRESS - PREHEATING
AND BAKING TIME EXTENSION:
 The Mistral Series ovens have a high amount of programmes, preset or fully customizable,
to cope optimally with any cooking needs, with any food product. Each of these
programmes will follow the cooking cycle of the product step by step and automatically,
responding promptly to all possible situations of alarm in automatic or assisted mode,
ideal for the user. One of these alarms is programmed to report the overtemperature
inside the oven chamber when a cooking programme is carried out. The alarm in question
will be shown on display 4 and propose the execution of the "Cool" cooling programme.
When the oven chamber has cooled down, you can proceed with setting the execution of
the desired cooking programme.
 The preheating phase, highlighted by "PRE" on the "Temperature" 2 display, brings the
oven to a temperature of about 30° higher than the value set in the first step of the
programme, to compensate for the lowering of the temperature when the door is opened.
The end of this phase is reported on display 4 and it is accompanied by an acoustic signal
and by the flashing of the lights inside the chamber. Now you can place the product to be
baked inside the oven and, when the oven door is closed, the programme will begin its
baking cycle.
 At the end of the baking cycle, the oven emits an acoustic signal. The time symbol flashes
displaying a countdown of two minutes, during which time you can extend the baking
time as necessary. During these two minutes you can open the oven door and check the
cooking of the product. If the product needs a cooking extension, use the "+" key to
increase the time by one minute per push, until the desired value has been reached.
Press the key to restart the baking. If no extension is made within the two minutes
displayed, the oven terminates the baking cycle.