Manual

B6TTR-B10TTR – page. 84
ROUTINE AND SPECIAL MAINTENANCE
The unit must be checked regularly by a specialized technician.
The oven is equipped with a thermal switch with manual reset which intervenes in case of
overheating. To reset the thermal switch (after it has turned on), unscrew the plug on the lower left
part of the oven back, then press the button to perform the reset. If the switch trips continuously,
contact a specialized technician for a thorough check.
CLEANING AND CARE:
• To obtain a constant, automated degree of cleanliness and hygiene inside the chamber, you can
purchase our “Automatic Washing Kit”, available as option on request.
• Do not clean the unit with a high-pressure cleaner or with direct jets of water.
• During cleaning, turn off the power supply to the oven.
• Clean the unit after it has cooled off.
• Do not use cold water on hot glass.
• The oven chamber should be cleaned daily in order to ensure maximum hygiene.
It is advisable to leave the oven door ajar at the end of each work session, to safeguard the door
closing seals.
WHAT TO DO IN CASE OF PROLONGED SHUTDOWN
If the unit is not going to be used for an extended period of time (seasonal closing, vacation, etc.),
it is advisable to clean it following the instructions and warnings here above listed, after that
disconnect the electrical devices and close the cut-off cocks upstream.
NOTES: