Manual

B6TTR-B10TTR – page. 62
CUSTOMIZED PROGRAMS MANAGING MODE:
With the USB memory stick connected, press the key . The normal menu now also contains
the Programs Management menu. The options of the normal menu will work normally.
To access the programs management menu, select this option and press the key . The items
described here below are disabled if the “Lock Programs” option is activated in the oven
parameters.
The menu is structured as follows:
 DELETE = it allows to delete a preset programs stored in the oven. Choose the option with
the key . scroll the programs list (the “Temperature” display will show the writing
“Del”), choose the program to be deleted with the keys “+” and “-“ and, once positioned on
the selected program, press for 3 seconds the key . the program is than deleted. The
display will show the writing “******” during this operation. The end of this procedure will be
underlined by an acoustic signal. Repeat the same procedure for all programs to be
deleted. To exit the manu “Delete” press the key .
By pressing the key for 3 seconds the procedure is interupted, and the electronic control gets
back to the main visualization.
 IMPORT = it allows to import in the oven all customized programs stored in the USB pen-
drive. The files names will have to be maximum 6 digits long and extension .upf. They will
to access be found in the folder “Univex”. Select the writing “Import” with the key
the following sub-menus:
 OVERWRITE ALL = it allows to overwrite all programs in the oven with the
ones imported from the USB pen-drive.
 IN QUEUE = this options stores the imported programs in queue after the
programs already existing in the oven. The programs having the same
name will be overwritten.
The display will show the writing “******” during this operation. The end of this procedure will be
underlined also by an acoustic signal.
 EXPORT = it allows to export the programs already stored in the oven in the USB pen-drive.
Select the option with the key to access the following undermenus:
 ALL = it exports all customized programs existing in the oven in the pen-
drive, by overwriting the programs having the same name and eventually
present in the USB pen-drive.
 SELECT = it allows to select the programs to be exported. Enter in the
option by pressing the key . Scroll the programs list (the display
“Temperature” will suggest the writing “Save”), choose the rpograms to be
exported with the keys “+” and “-“ and, once positioned on the chosen