- AT&T Speakerphone/Answering System with Caller ID/Call Waiting User's Manual

Answering system operation
Changing feature options
When the answering system is on, you can customize
how the system operates. Press and hold TAS/SETUP to
begin, then press repeatedly to hear each feature. Press
SKIP or REPEAT to change the setting of any fea-
ture. Or press PLAY/STOP to exit.
Feature options (Default settings underlined).
System announces: Feature description:
2.
Press TAS/SETUP
until desired feature is
heard (see list at right).
4.
Press TAS/SETUP
to set selection and
move to next menu
option.
-OR-
3.
Press SKIP or
REPEAT until desired
selection is heard.
Press PLAY/STOP
to set selection and
exit menu.
1.
Press and hold
TAS/SETUP for one
second to enter
feature menu.
“Selected announcement
is,” current setting, then "To
select a different announce-
ment, press SKIP or REPEAT ."
Options: A/Announce only
“Number of rings is,” current
setting, then "To change the
number of rings, or select
toll saver, press SKIP or
REPEAT ." Options: 2-7/24/46
(default 4)
“Message alert is,” current
setting, then "To change,
press SKIP or REPEAT ."
Options: On/Off
"Remote access code is,"
current setting, then "To select
the first digit, press SKIP or
REPEAT , then press SETUP."
"Select the second digit, then
press SETUP."
"Select the third digit, then
press SETUP."
Options: 500-999
(default 500)
A: Callers can leave messages.
Announce only: Callers cannot
leave messages (page 23).
Choose number of rings before
the system answers a call (2 to 7).
There are two toll saver options:
2/4 (the system answers after two
rings if there are new messages/
memos; otherwise, it answers after
four rings) and 4/6 (the system
answers after four rings if there are
new messages/memos; otherwise,
it answers after six rings).
When on, the telephone beeps
every 15 seconds when you have
new messages.
Follow the prompts to enter a
three-digit number (must be
between 500 and 999).
24