Manualshelf

User's Manual

ManualsBrandsUNIVET ManualsVirtual RealityPersonal Protective Equipment for eyes with augmented reality connected to Control Unit
12345678910
5. Control Unit Before Starting
TURN ON/OFF
Here the procedure to turn ON and turn OFF the Univet Control Unit
TURN ON
1. Connect the Control Unit and VisionAR Smart glasses through USB cable
2. Place the Control unit 20cm far from the body
3. Drive the power button up and release
TURN OFF
To turn off the Control Unit:
1. Drive the power button up and hold for 5 seconds. Now you can release the power button verifying
that LED lights are not flashing and only red one is on
2. Disconnect the USB cable from the Control Unit and from VisionAR Smart glasses
Remember that the Control Unit can work only when two subunits are connected